| Resistance R25 | 0.7–400 Ω |
|---|---|
| Max. steady-state current (25 °C) | 0.1–12 A |
| Residual resistance at max. current | 0.014–11.65 Ω |
| B value | 2,400–3,400 K |
| Disc size | 5D–25D |
| Operating temperature | −40 °C to +155 / +175 / +200 °C |
Silicone-coated radial power NTC thermistors for inrush current limiting. R25 0.7–400 Ω, max. steady-state current up to 12 A, operating temperature up to +200 °C depending on disc size.
Showing 25 of 1,044 part numbers
| MF0503002M6TX1CFB6 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 4 |
|---|---|---|---|---|---|---|---|---|
| MF0503003M1TQ0CFTD0 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 4 |
| MF0503003M8BX7CFND0 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 5 |
| MF05030S5M3AA0FSB00 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 2.5 |
| MF05030S5M3AA0FSBE0 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 2.5 |
| MF05030S5M3TX8FSBC | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 4 |
| MF05030S5M4BP0CFT0 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 5 |
| MF05030S5M4BP0FST0 | 3D-5 | 5 | 3 | ±20 | 1.5 | 0.19 | 2,500 | 5 |
| MF0505001M1BN0CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BA0CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BA0CSBC | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BA0FSB00 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BA3FSB00 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BA5CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BA5FSB00 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3BB0CSBC | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M3PA5CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 3.5 |
| MF0505001M3PA5FSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 3.5 |
| MF0505001M3TA0CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 4 |
| MF0505001M3TX8CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 4 |
| MF0505001M4BA0CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M4BN0CSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M4BN0FSB0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M4BP0CST0 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
| MF0505001M8BA0FSB00 | 5D-5 | 5 | 5 | ±20 | 1 | 0.353 | 2,500 | 5 |
— = not specified
Need a value that is not listed? Send us your specification.
Datasheets, technical documents and approval certificates for this series. English editions of documents marked “Chinese” are available on request.
Silicone-coated radial power NTC thermistors (MF72 type) for inrush current limiting. Disc sizes 5D to 25D, R25 0.7–400 Ω ±20%, max. steady-state current 0.1–12 A at 25 °C, residual resistance 0.014–11.65 Ω. Operating temperature up to +155 °C, +175 °C or +200 °C, depending on disc size.
| Function | Self-heating radial NTC thermistor for inrush current limiting. High cold resistance limits the turn-on current; resistance falls as load current heats the ceramic. |
|---|---|
| Type | PS (silicone coating), MF72 power NTC thermistor type |
| Encapsulation | Silicone resin · code S = silicone, RoHS; F = silicone, halogen-free |
| Disc sizes | 5D · 7D · 9D · 11D · 13D · 15D · 20D · 25D |
| Rated zero-power resistance R25 | 0.7–400 Ω; available values depend on disc size |
| R25 tolerance | M = ±20% |
| Max. steady-state current | 0.1–12 A at 25 °C; depends on R25 and disc size |
| Residual resistance at max. current | 0.014–11.65 Ω |
| B value | 2,400–3,400 K ±10% (reference temperatures and R/T data on request) |
| Thermal time constant | <18 to <127 s; per part number |
| Dissipation constant | >6 to >35 mW/°C; per part number |
| Operating temperature | −40 °C to +155 °C (5D) · −40 °C to +175 °C (7D, 9D, 11D) · −40 °C to +200 °C (13D, 15D, 20D, 25D) |
| Max. voltage and capacitance | Max. operating voltage and permissible DC-bus capacitance on request. R25 and max. current alone do not qualify an inrush design. |
| Restart and recovery | Min. off-time, resistance-recovery curve and repetitive-start limits on request. A hot NTC gives little inrush limiting at restart. |
| Dimensions, 5D | D max. 6.5 mm · T max. 4.0 mm · lead pitch F 5.0 mm · lead Ø d 0.6 ±0.05 mm |
| Dimensions, 7D | D max. 8.0 mm · T max. 4.5 mm · lead pitch F 5.0 mm · lead Ø d 0.6 ±0.05 mm |
| Dimensions, 9D | D max. 9.0 mm · T max. 5.5 mm · lead pitch F 5.0 mm · lead Ø d 0.6 ±0.05 mm |
| Dimensions, 11D | D max. 11.5 mm · T max. 6.0 mm · lead pitch F 7.5 mm · lead Ø d 0.8 ±0.05 mm |
| Dimensions, 13D | D max. 14.5 mm · T max. 6.5 mm · lead pitch F 7.5 mm · lead Ø d 0.8 ±0.05 mm |
| Dimensions, 15D | D max. 16.5 mm · T max. 6.5 mm · lead pitch F 7.5 mm · lead Ø d 0.8 ±0.05 mm |
| Dimensions, 20D | D max. 21.5 mm · T max. 7.0 mm · lead pitch F 10.0 mm · lead Ø d 1.0 ±0.05 mm |
| Dimensions, 25D | D max. 26.0 mm · T max. 8.0 mm · lead pitch F 10.0 mm · lead Ø d 1.0 ±0.05 mm |
| Lead forms | Long straight · short straight · single outward bend · inward bend · front/rear raised |
| Lead length | Long straight ≥16 mm; short and bent forms 2.5–<6 mm ±0.5 mm or 6–10 mm ±1.0 mm. Coating-to-bend height depends on the lead form. |
| Lead pitch codes | B = 5.0 mm · E = 7.5 mm · D = 10.0 mm; pitch tolerance: see part drawing |
| Packing | B = bulk · T = taped; taping for 5.0, 7.5 and 10.0 mm lead pitch; H0 and component pitch depend on the lead form |
| Hand soldering and rework | 350 °C max. · 3 s max. · solder point at least 2 mm from the coating |
| Storage | ≤35 °C · ≤70% RH · 12 months · first in, first out · sealed with desiccant; avoid corrosive or oxidizing gases, oil, water, solvents and direct sunlight |
| Approval temperature range | 40/155/42 (CQC climate category) |
| Environmental compliance | RoHS and REACH compliant; encapsulation code F is halogen-free. Material declarations on request. |
| Further data | On request: current derating and hot resistance versus ambient temperature; inrush energy rating (J or test capacitance at 110/120 VAC and 230/240 VAC); coating flammability class, abnormal-overload behavior and max. surface temperature; reliability test results. |
| System protection | A power NTC thermistor is not a fuse, relay, isolation device or hot-restart limiter. Coordinate fault current, bypass contacts, enclosure temperature, fire containment and service behavior at equipment level. |
Ranges by dielectric, package and lead style within this series.
| Variant | Body dimensions | R25 range | Max. steady-state current / residual resistance | Lead / land pattern | Notes |
|---|---|---|---|---|---|
| 5D-PS | D max. 6.5 mm · T max. 4.0 mm | 1.5–220 Ω | 0.1–1.8 A · 0.13–6.859 Ω | F 5.0 mm · d 0.6 ±0.05 mm | Smallest size; up to +155 °C. |
| 7D-PS | D max. 8.0 mm · T max. 4.5 mm | 0.7–200 Ω | 0.2–4.5 A · 0.082–11.65 Ω | F 5.0 mm · d 0.6 ±0.05 mm | Compact size; up to +175 °C. |
| 9D-PS | D max. 9.0 mm · T max. 5.5 mm | 0.7–200 Ω | 0.8–6.0 A · 0.062–5.007 Ω | F 5.0 mm · d 0.6 ±0.05 mm | Up to +175 °C, with a broad R25 and current range. |
| 11D-PS | D max. 11.5 mm · T max. 6.0 mm | 0.7–400 Ω | 0.5–5.5 A · 0.04–9.252 Ω | F 7.5 mm · d 0.8 ±0.05 mm | Widest R25 range, up to 400 Ω; up to +175 °C. |
| 13D-PS | D max. 14.5 mm · T max. 6.5 mm | 0.7–120 Ω | 1.2–7.5 A · 0.045–2.124 Ω | F 7.5 mm · d 0.8 ±0.05 mm | Smallest size rated to +200 °C. |
| 15D-PS | D max. 16.5 mm · T max. 6.5 mm | 0.7–120 Ω | 1.8–9.0 A · 0.035–1.652 Ω | F 7.5 mm · d 0.8 ±0.05 mm | Higher current, up to +200 °C, for larger input stages. Validate energy, hot loss and restart. |
| 20D-PS | D max. 21.5 mm · T max. 7.0 mm | 0.7–120 Ω | 2.5–11 A · 0.018–1.628 Ω | F 10.0 mm · d 1.0 ±0.05 mm | Large size, up to +200 °C. |
| 25D-PS | D max. 26.0 mm · T max. 8.0 mm | 0.7–20 Ω | 6–12 A · 0.014–0.21 Ω | F 10.0 mm · d 1.0 ±0.05 mm | Highest current in the series. Check body temperature, spacing, and fuse and bypass coordination. |
Start from the energy and the permissible inrush current of the input stage, not from disc size. Then select R25, check continuous current and hot loss at max. ambient temperature, define the restart duty, and specify temperature grade, approval, drawing and packing with the part number.
Define line or DC-bus voltage, tolerance, frequency, downstream capacitance or transformer magnetizing energy, source impedance, number of starts and min. off-time. The energy (J) or test-capacitance rating, available on request, must exceed the application stress.
Estimate R25 from peak voltage, existing series impedance and the weakest bridge, fuse, switch or load limit. Include the ±20% R25 tolerance and the coldest start temperature.
Max. current and residual resistance apply only at their stated condition (25 °C). Data on request for ambient derating, hot resistance versus current, body and lead temperature, airflow and mounting conditions, and life at the actual load.
A hot NTC has low resistance and limits little at restart. Define recovery time, repetitive starts, bypass-relay timing and contact stress, fuse coordination, abnormal overload and safe end of life.
Fix R25, max. current, temperature grade (+155, +175 or +200 °C), drawing and pitch tolerance, lead form, packing, coating code and approval scope with the exact part number.
Approvals are issued for MF72 types. CQC approval covers climate category 40/155/42; approval status of +175 °C and +200 °C types on request.
| Agency | Standard | Certificate | Scope |
|---|---|---|---|
| CQC | GB/T 6663.1-2007 · CQC11-471552-2015 rule | CQC19001213204 | MF72 types, ±20%, listed per resistance value; climate category 40/155/42. Valid to 9 Apr 2029, subject to surveillance. |
| UL / cUL | UL 1434 | E474052 | Recognized component. The file lists individual inrush-limiting NTC models with their conditions of acceptability. |
| VDE | DIN EN 60539-1:2017-01 · EN 60539-1:2016 | 40050168 | Covers listed MF72 types under factory surveillance. |
Each certificate covers the types and ratings listed on it.
For a capacitor-input supply, ½CV² is a first estimate; source impedance and waveform also matter. The selected part needs an energy or test-capacitance rating, available on request, above the actual startup energy and duty.
Choose cold resistance from peak voltage, minimum source impedance, tolerance and cold temperature so that the bridge, fuse, switch, relay contacts and load stay below their turn-on limits.
Continuous current heats the NTC. Validate ambient, airflow, PCB heat sinking, enclosure temperature, residual resistance, loss, body and lead temperature and current derating. The 25 °C value does not apply at higher ambient temperature.
Self-heating causes current hogging between parallel parts. If one part cannot meet the current or energy requirement, select a larger size or an active precharge or bypass circuit.
A recently energized NTC stays hot and low in resistance and may not limit a fast restart. Define min. off-time, recovery detection, bypass-relay timing, contact stress and repetitive-start fault behavior.
Keep spacing from heat-sensitive materials, coordinate upstream protection and fire containment, use the lead drawing of the exact part number, observe the 350 °C / 3 s rework limit and store the parts dry and sealed.
Example ordering code. Not every combination is available.
MF · 05 · 100 · X8 · M · 3 · B · X7 · C · S · B · 0 · 0
| Code | Meaning |
|---|---|
| MF | Power NTC thermistor prefix (MF72 type) |
| 05 | Disc diameter: 05 = 5 mm; up to 25 mm |
| 100 | R25: 100 = 10 Ω; decimal values written as 0R7 |
| X8 | Max. steady-state current: X8 = 0.8 A; other codes on request |
| M | R25 tolerance: M = ±20% |
| 3 | Lead form: 3 = short straight; 1 = long straight, 2 = single outward bend, 4 = inward bend, 8 = front/rear raised |
| B | Lead pitch: B = 5.0 mm; E = 7.5 mm, D = 10.0 mm |
| X7 | Lead length, bulk: X0–X9 cover 2.0–2.9 mm; exact length: see part drawing |
| C | Lead material: C = copper wire; F = tin-plated copper-clad steel, where the construction permits |
| S | Encapsulation: S = silicone resin, RoHS; F = silicone resin, halogen-free |
| B | Packing: B = bulk; T = taped |
| 0 | Factory code, assigned by STE |
| 0 | Factory code, assigned by STE |
