MEF/CL21X

MEF/CL21X series compact metallized polyester film capacitors

Rated voltage50 / 63 / 100 VDC
Tolerance±5% / ±10%
Operating temperature−40 °C to +125 °C
High-temperature voltage deratingReduce rated voltage by 1.25% per °C from +105 to +125 °C
Lead spacing5 / 7.5 mm
CapacitanceAvailable by part number

Compact epoxy-dipped metallized polyester film capacitors for bypass, coupling, filtering and low-pulse circuits. Rated 50, 63 and 100 VDC; capacitance and dimensions specified by part number.

Series product photograph
Series product photograph

Applications and selection

Compact metallized polyester film capacitors with a non-inductive, self-healing winding and epoxy-resin dip coating. For bypass, blocking, coupling, filtering and low-pulse circuits. Rated 50, 63 and 100 VDC, with ±5% or ±10% tolerance. Operates from −40 °C to +125 °C; reduce rated voltage by 1.25% per °C above +105 °C. Capacitance, body dimensions and 5 or 7.5 mm lead spacing are specified by part number.

Series features

  • Metallized PET film, non-inductive winding, compact epoxy-dipped body
  • Rated 50, 63 and 100 VDC; capacitance specified by part number
  • Lead spacing 5 mm up to 100 nF; 7.5 mm from 120 nF to 1 µF
  • Self-healing; operating temperature −40 °C to +125 °C

What to check

Start with the space constraint and the duty: filtering or low pulse. Then check voltage, capacitance, frequency loss, pulse current, dielectric drift, temperature derating, self-heating of the compact body, lifetime and dimensions.

  1. Define waveform, stability and space constraints

    Specify DC bias, AC ripple, frequency spectrum, peak voltage, rise and fall time, dV/dt, repetition rate, RMS current, allowed drift or absorption error, ambient temperature, board spacing, cooling and service hours.

  2. Select voltage, capacitance and lead spacing

    The series covers 50/63/100 VDC and 1 nF–1 µF, with 5 mm lead spacing up to 100 nF and 7.5 mm above. For higher voltages, other values, or values above 100 nF at 5 mm, request the part specification.

  3. Calculate pulse, loss and self-heating

    Use Ipk = C·dV/dt and the measured spectrum, and check the result against the dV/dt, repetitive and RMS current, ESR, impedance, self-resonance, thermal-resistance and hot-spot data for the part (on request).

  4. Check derating and PET stability

    Before operation above +85 °C, check the voltage–temperature derating curve, dielectric absorption, capacitance and loss versus temperature and frequency, drift and loaded-life data (on request).

  5. Confirm dimensions and assembly

    Match the part number to voltage, capacitance, tolerance, W/H/T, lead spacing, lead form, packing, marking and soldering profile. Do not use reflow soldering; validate forming stress, cleaning, coating compatibility, vibration and thermal cycling.

Datasheets & approval documents

Download datasheets and technical documents for this series. Contact STE for approval documents covering your selected part. For editions not listed here, contact STE.

Request approval documents and further information

Engineering details

Specifications
Product typeCompact metallized polyester DC film capacitor for bypass, blocking, coupling, filtering and low-pulse circuits; not a safety capacitor, not for reflow soldering
ConstructionMetallized polyethylene terephthalate (PET) film · non-inductive winding · epoxy-resin dipped radial body
Rated DC voltage50 · 63 · 100 VDC
Capacitance rangeCapacitance specified by part number
Capacitance toleranceJ ±5% · K ±10%
Operating temperature−40 °C to +125 °C
Voltage deratingReduce rated voltage by 1.25% per °C from +105 °C to +125 °C.
Climatic category40/100/21
Storage temperature+15 °C to +35 °C
Dissipation factortan δ ≤1.0% at 1 kHz, 1.0 Vrms, 20 °C
Insulation resistance, C ≤0.33 µF≥15,000 MΩ at 100 VDC, 60 s, 20 °C; test voltage for 50 and 63 VDC parts on request
Insulation resistance, C >0.33 µFTime constant IR × C ≥5,000 s at 100 VDC, 60 s, 20 °C
Voltage proof, terminal to terminal1.6 × UR for 5 s
Pulse ratingsDesigned for low-pulse duty; dV/dt, K0, peak and repetitive current, pulse energy and repetition rate on request
AC operationDC-rated only; do not use in AC, resonant or capacitive-dropper circuits without frequency, current and lifetime data (on request)
Safety classNon-safety product; no X/Y class and no agency approval. Do not use across the line or line to earth.
CoatingEpoxy resin
Body dimensionsW 7.3–10.5 · H 7.0–14.0 · T 3.5–9.5 mm; maximum values depend on voltage and capacitance
Lead spacing5.0 mm for 1–100 nF · 7.5 mm for 120 nF–1 µF · ±1.0 mm
Lead diameter0.5 ±0.05 mm at 5 mm spacing · 0.6 ±0.05 mm at 7.5 mm spacing
Lead forms and packingLong straight · inner-bent · straight taped · bent taped
TapingTape dimensions specified for 5 and 7.5 mm lead spacing
Soldering profile, PPPreheat ≤110 °C · soldering ≤120 °C · ≤15 s
Soldering profile, PEPreheat ≤125 °C · soldering ≤160 °C · ≤15 s
Hand soldering350 °C max. · 3 s max. · ≥2 mm from the coating
Reflow solderingNot permitted; film shrinkage can degrade performance
Environmental complianceRoHS and REACH compliant; bromine-free and halogen-free. Material declarations on request.
Further dataOn request: clearing energy, capacitance loss and end-of-life limits · storage humidity and shelf life · ESR, thermal resistance, hot-spot rise and lead-temperature limits · ESL, impedance, self-resonance, permissible voltage and current versus frequency, dielectric absorption and drift · flame class · loaded-life, thermal endurance, pulse-life, damp-heat, overload, thermal-cycle, vibration and lead-strength test results
Variants

Ranges by dielectric, package and lead style within this series.

VariantBody dimensionsRated voltage / capacitanceDielectric / tolerance / coatingLead / land patternNotes
D · 5 mmW 7.3–7.5 · H 7.0–9.5 · T 3.5–4.5 mm50 / 63 / 100 VDC · 1–100 nFMetallized PET · J/K · epoxy dippedP 5.0 ±1.0 · d 0.5 ±0.05 mmCompact size up to 100 nF; higher values at 5 mm lead spacing on request.
J · 7.5 mmW 7.5–10.5 · H 7.5–14 · T 4–9.5 mm50 / 63 / 100 VDC · 120 nF–1 µFMetallized PET · J/K · epoxy dippedP 7.5 ±1.0 · d 0.6 ±0.05 mmHigher capacitance, 120 nF–1 µF. Availability on request.
Design notes

Compact size has thermal and electrical tradeoffs

A 5 mm body saves board area but reduces the thermal surface and may change winding geometry. Verify current, ESR, hot-spot rise and lifetime for the selected capacitance and voltage.

Quantify low-pulse duty

“Low pulse” is qualitative. Calculate I = C·dV/dt and check it against the dV/dt, repetitive-current and temperature-rise limits for the part number.

Values below 10 nF

The ordering code and dimension table cover 1 nF to 1 µF. Check the availability of values below 10 nF before design-in.

Derating above +85 °C

For operation above +85 °C, use the voltage derating curve, case or hot-spot limit and loaded-life data for the part.

Values above 100 nF at 5 mm

The datasheet assigns values above 100 nF to 7.5 mm lead spacing. For parts above 100 nF with 5 mm lead spacing, request the body and winding drawing, loss and current data and qualification report.

Control heat and lead stress during assembly

Do not use reflow soldering. Follow the soldering profile, keep forming stress away from the epoxy interface, and validate cleaning, coating, vibration and thermal cycling.

Part numbering

Example ordering code. Not every combination is available.

LX · 1J · 104 · J · D · 1 · B0 · 073 · 095 · 045 · E · 0 · X

CodeMeaning
LXSeries code: MEF/CL21X
1JRated voltage code: 1J = 63 VDC; 1H = 50 VDC, 2A = 100 VDC
104Capacitance code: 104 = 100 nF; range 1 nF–1 µF
JCapacitance tolerance: J = ±5%, K = ±10%
DLead spacing: D = 5 mm; J = 7.5 mm, used above 100 nF
1Lead form: 1 = long straight, 2 = inner-bent, 5 = straight taped, 6 = bent taped
B0Lead length code: B0 = 20.0 mm
073Body width: 073 = 7.3 mm
095Body height: 095 = 9.5 mm
045Body thickness: 045 = 4.5 mm
EEnvironmental code: E = RoHS, F = RoHS and halogen-free

Part numbers

Check electrical ratings, dimensions and ordering options in the datasheet. Send us your requirements to confirm the final part number and availability.

Search the part-number list

Showing 25 of 266 listed part numbers

Datasheet
LX1H102JD140070060035EOXOn request
LX1H103JD1B0070065035EOXOn request
LX1H104JD1B0070065035EOXOn request
LX1H153JD1B0070065035EOXOn request
LX1H223JD1B0070060035EOXOn request
LX1J102JD1B0070060035EOXOn request
LX1J103JD1B0070065035EOJOn request
LX1J103JD1B0070065035EOXOn request
LX1J103KD1B0070065035EOXOn request
LX1J104JD1B0070060035EOJOn request
LX1J104JD1B0070060035EOXOn request
LX1J104JD2B0070060035ETXOn request
LX1J104JD5B0070060035EOJOn request
LX1J104JD5B0070060035EOXOn request
LX1J104JD6B0070060035ETJOn request
LX1J104KD1B0070060035EOXOn request
LX1J105JD1B0070110060EOJOn request
LX1J105JD1B0070110060EOXOn request
LX1J105JD5B0070110060EOJOn request
LX1J105KD1B0070110055EOXOn request
LX1J105KD1B0070110060EOXOn request
LX1J222JD1B0070060035EOXOn request
LX1J223JD1B0070060035EOJOn request
LX1J224JD135070065035EOXOn request
LX1J224JD1B0070065035EOXOn request

Need a value that is not listed? Send us your specification.