| Safety class | X2, across-the-line |
|---|---|
| Automotive qualification | AEC-Q200 Rev E qualified part numbers available |
| Rated voltage | 275 / 305 / 310 / 330 / 350 VAC |
| Capacitance | 0.001–10 µF |
| Temperature cycling | 1,000 cycles, −55 °C to +110 °C |
| Climatic category | 40/110/56 |
Automotive boxed metallized polypropylene film capacitors, Class X2, for across-the-line EMI suppression. AEC-Q200 Rev E qualified part numbers available; 275–350 VAC; 1 nF–10 µF.
Showing 25 of 282 part numbers
| X2Q2102KJ1B0100090040ESG | 0.001 | ±10 | 305 | X2 |
|---|---|---|---|---|
| X2Q3102KJ1B0100090040ESG | 0.001 | ±10 | 310 | X2 |
| X2Q3102KN1B0130090040ESG | 0.001 | ±10 | 310 | X2 |
| X2Q2122KJ1B0100090040ESG | 0.0012 | ±10 | 305 | X2 |
| X2Q3122KJ1B0100090040ESG | 0.0012 | ±10 | 310 | X2 |
| X2Q3122KN1B0130090040ESG | 0.0012 | ±10 | 310 | X2 |
| X2Q2152KJ1B0100090040ESG | 0.0015 | ±10 | 305 | X2 |
| X2Q3152KJ1B0100090040ESG | 0.0015 | ±10 | 310 | X2 |
| X2Q3152KN1B0130090040ESG | 0.0015 | ±10 | 310 | X2 |
| X2Q2182KJ1B0100090040ESG | 0.0018 | ±10 | 305 | X2 |
| X2Q3182KJ1B0100090040ESG | 0.0018 | ±10 | 310 | X2 |
| X2Q3182KN1B0130090040ESG | 0.0018 | ±10 | 310 | X2 |
| X2Q2222KJ1B0100090040ESG | 0.0022 | ±10 | 305 | X2 |
| X2Q3222KJ1B0100090040ESG | 0.0022 | ±10 | 310 | X2 |
| X2Q3222KN1B0130090040ESG | 0.0022 | ±10 | 310 | X2 |
| X2Q2272KJ1B0100090040ESG | 0.0027 | ±10 | 305 | X2 |
| X2Q3272KJ1B0100090040ESG | 0.0027 | ±10 | 310 | X2 |
| X2Q3272KN1B0130090040ESG | 0.0027 | ±10 | 310 | X2 |
| X2Q2332KJ1B0100090040ESG | 0.0033 | ±10 | 305 | X2 |
| X2Q3332KJ1B0100090040ESG | 0.0033 | ±10 | 310 | X2 |
| X2Q3332KN1B0130090040ESG | 0.0033 | ±10 | 310 | X2 |
| X2Q2392KJ1B0100090040ESG | 0.0039 | ±10 | 305 | X2 |
| X2Q3392KJ1B0100090040ESG | 0.0039 | ±10 | 310 | X2 |
| X2Q3392KN1B0130090040ESG | 0.0039 | ±10 | 310 | X2 |
| X2Q2472KJ1B0100090040ESG | 0.0047 | ±10 | 305 | X2 |
— = not specified
Need a value that is not listed? Send us your specification.
Datasheets, technical documents and approval certificates for this series. English editions of documents marked “Chinese” are available on request.
Automotive boxed metallized polypropylene film capacitors for across-the-line (L–N) EMI suppression, Class X2 to IEC 60384-14. AEC-Q200 Rev E qualified part numbers available; temperature cycling 1,000 cycles, −55 °C to +110 °C. Rated 275, 305, 310, 330 and 350 VAC; 1 nF–10 µF; tolerance ±10%. Climatic category 40/110/56. Lead pitch 7.5–37.5 mm.
| Product role | Automotive Class X2 across-the-line (L–N) interference-suppression capacitor |
|---|---|
| Construction | Boxed metallized polypropylene film |
| Safety function | Class X2 to IEC 60384-14 for differential-mode mains suppression · not for line-to-earth (Y) or reinforced-insulation positions |
| Automotive qualification | AEC-Q200 Rev E qualified part numbers available; qualification report and temperature grade on request |
| Temperature cycling | 1,000 cycles, −55 °C to +110 °C |
| Climatic category | 40/110/56 (lower category temperature −40 °C; −55 °C is a temperature-cycling test condition) |
| Operating temperature | Upper category temperature +110 °C |
| Rated AC voltages | 275 · 305 · 310 · 330 · 350 VAC |
| Capacitance range | 0.001–10 µF; available values depend on rated voltage and pitch |
| Capacitance tolerance | ±10% (K) |
| Dissipation factor | tan δ ≤0.1% |
| Insulation resistance, CR ≤0.33 µF | ≥15,000 MΩ |
| Insulation resistance, CR >0.33 µF | Time constant R × C ≥5,000 s |
| IR measurement conditions | 20 °C · 100 VDC · 60 s |
| Voltage proof, terminal to terminal | 4.3 × UR DC, 5 s |
| Voltage proof, terminals to case | 2 × UR + 1,500 VAC, min. 2,000 VAC |
| UL approval | UL 60384-14 · E208107 · 0.001–10 µF, 275–350 VAC |
| VDE approval | EN 60384-14:2017 · 40034679 · 0.001–10 µF, 275–350 VAC |
| CQC approval | GB/T 6346.14-2023 · CQC19001213200 · 0.001–10 µF, 275–350 VAC |
| KC approval | K 60384 · SU03031-12001C / 12002C / 12003D / 12004D / 23001 / 23002, by capacitance band from ≤0.1 µF to 4.7–10 µF |
| Lead pitch | 7.5 · 10 · 12.5 · 15 · 22.5 · 27.5 · 37.5 mm |
| Pitch codes | N 10 · Q 15 · T 22.5 · V 27.5 mm; 7.5, 12.5 and 37.5 mm codes on request |
| Automotive suffix | G in the last position of the part number = automotive product |
| Voltage codes | P2 275 · Q2 305 · Q3 310 · R1 330 · R2 350 VAC |
| Lead-form codes | 1 long straight · 2 inner-bent · 5 straight taped · 6 bent taped |
| Environmental codes | E RoHS · F RoHS + halogen-free |
| Case-color codes | S yellow · E gray |
| Body dimensions | W 10–42.5 · H 9–50 · T 4–35 mm; nominal dimensions ±0.5 mm |
| Lead and pitch tolerance | P ±0.5 mm · lead diameter ±0.05 mm |
| Lead diameter | Ø0.6 mm at 7.5 / 10 / 12.5 mm pitch · Ø0.8 mm at 15 / 22.5 / 27.5 mm · Ø1.0 mm at 37.5 mm |
| Lead forms | Long straight and inner-bent lead drawings in the datasheet; lead length coded from 3.0 to 39.0 mm |
| Taped lead spacing F | 7.5 / 10 / 15 / 22.5 mm; 5 mm on request |
| PP soldering limits (body temperature) | Preheat ≤110 °C · soldering ≤120 °C for ≤15 s |
| PE soldering limits (body temperature) | Preheat ≤125 °C · soldering ≤160 °C for ≤15 s |
| Wave-soldering profile (board) | Ambient to 115 °C max. in 30–130 s · rise to 260 °C max. in <1 s · peak region <10 s · cooling ≤5 °C/s |
| Reflow soldering | Not permitted; film shrinkage can degrade performance |
| Hand soldering | Tip ≤350 °C · ≤3 s · joint ≥2 mm from the encapsulation |
| Storage | ≤35 °C · ≤70% RH · ≤12 months in the unopened original packaging; avoid high temperature and humidity |
| Corrosive atmosphere | Hydrogen chloride, hydrogen sulfide and sulfur compounds can degrade terminal solderability |
| Further data on request | Metallization design and end-of-life behavior · continuous operating-temperature range and voltage derating · tan δ measurement conditions · duration and method of the terminals-to-case voltage proof · biased 85 °C / 85% RH humidity data · impulse and self-ignition test data · ESR/impedance, RMS and peak current, dV/dt, hot-spot temperature, thermal resistance and lifetime · PPAP, traceability, production screening and change notification |
Ranges by dielectric, package and lead style within this series.
| Variant | Body dimensions | Rated voltage / capacitance | Construction / tolerance | Lead / land pattern | Notes |
|---|---|---|---|---|---|
| 10 mm · N | W 13 · H 9–15.5 · T 4–8 mm | 275–350 VAC · 0.001–0.15 µF | Metallized polypropylene · K ±10% | P 10 ±0.5 · Ø0.6 ±0.05 mm | Compact case. |
| 15 mm · Q | W 18 · H 11–20 · T 5–11 mm | 275–350 VAC · 0.01–0.56 µF | Metallized polypropylene · K ±10% | P 15 ±0.5 · Ø0.8 ±0.05 mm | Main pitch for mid-range values. |
| 22.5 mm · T | W 26.5 · H 16–22 · T 7–13 mm | 275–350 VAC · 0.15–0.82 µF | Metallized polypropylene · K ±10% | P 22.5 ±0.5 · Ø0.8 ±0.05 mm | Mid-to-high capacitance values. |
| 27.5 mm · V | W 31–32 · H 20–37 · T 11–22 mm | 275–310 VAC: 0.47–3.9 µF · 330/350 VAC: to 3.3 µF | Metallized polypropylene · K ±10% | P 27.5 ±0.5 · Ø0.8 ±0.05 mm | High capacitance values; the maximum value is lower at 330 and 350 VAC. |
Define the safety position and the automotive mission profile first. Then specify one G-suffix part number whose AEC-Q200 report, safety approvals, voltage, capacitance, body, current and thermal limits, packing and process all match the application.
Use only line to line (across the line) where Class X2 meets the equipment standard, nominal voltage, installation category and surge environment. Do not use this series as a Y capacitor or insulation barrier.
Request the AEC-Q200 Rev E qualification report for the selected part number, with qualified part numbers, temperature grade, manufacturing site, test lots and results, and the change and requalification record.
Select the voltage, capacitance and body, and model AC frequency, harmonics, repetitive pulses, hot spot, ambient temperature and humidity, duty cycle, vibration and required lifetime. dV/dt, current and thermal limits on request.
Specify the complete part number, including the G suffix, marking, approved construction, dimensions, lead form, packing and material codes.
Validate the PP/PE soldering limits, board profile, hand rework, cleaning and coating, vibration, biased humidity, endurance, surge and impulse, and end-of-life behavior in the final enclosure and safety file.
Safety approvals: IEC 60384-14 (UL, VDE/ENEC, CQC, KC). Automotive qualification: AEC-Q200. Approval and AEC-Q200 coverage of individual G-suffix part numbers on request.
| Agency | Standard | Certificate | Scope |
|---|---|---|---|
| UL | UL 60384-14 | E208107 | 0.001–10 µF, 275–350 VAC. |
| VDE / ENEC10 | EN 60384-14:2017 | 40034679 | 0.001–10 µF, 275–350 VAC. |
| CQC | GB/T 6346.14-2023 | CQC19001213200 | 0.001–10 µF, 275–350 VAC. |
| KC | K 60384 | SU03031 family | Six certificates divide the range up to 10 µF by capacitance band. |
Each certificate covers the types and ratings listed on it.
Initial electrical limits, AEC-Q200 Rev E qualification and a temperature-cycling test (1,000 cycles, −55 °C to +110 °C) are specified. The qualification report and humidity, endurance, current and thermal data are available on request.
| Test | Condition | Acceptance |
|---|---|---|
| Temperature cycling | 1,000 cycles, −55 °C to +110 °C | Dwell time, sample size and post-test ΔC, tan δ, IR and voltage-proof limits on request |
AEC-Q200 qualification does not transfer to every similar MPX part. Tie the BOM part number to the qualification report, similarity rationale, manufacturing site, construction, safety approvals and change record.
Use across line conductors for differential-mode suppression where the equipment standard accepts X2. It is not suitable as a Y capacitor, line-to-earth component or reinforced-insulation barrier.
AEC-Q200 stress qualification does not replace IEC 60384-14 safety approval, and an X2 certificate does not cover the automotive mission profile. Check both scopes for the selected part.
Rated VAC alone does not establish dV/dt, RMS or peak current, harmonic heating, repetitive surge, hot spot or service life. Obtain part-specific curves and validate the final enclosure across ambient temperature, humidity and duty cycle.
Check the pitch code, tape geometry, lead form and PP/PE soldering limits of the selected part number. Support large, heavy parts against vibration. Do not reflow-solder; validate soldering, cleaning, coating, storage and traceability.
Example ordering code. Not every combination is available.
X2 · Q3 · 104 · K · N · 1 · B0 · 130 · 120 · 060 · E · S · G
| Code | Meaning |
|---|---|
| X2 | Class X2 across-the-line film-capacitor series |
| Q3 | Rated voltage: Q3 = 310 VAC; P2 = 275, Q2 = 305, R1 = 330, R2 = 350 VAC |
| 104 | Capacitance code: 104 = 100 nF |
| K | Capacitance tolerance: K = ±10% |
| N | Lead pitch: N = 10 mm; Q = 15, T = 22.5, V = 27.5 mm; 7.5, 12.5 and 37.5 mm codes on request |
| 1 | Lead form: 1 = long straight; 2 = inner-bent, 5 = straight taped, 6 = bent taped |
| B0 | Lead length: B0 = 20.0 mm; codes A0–C9 or numeric |
| 130 | Body width: 130 = 13.0 mm |
| 120 | Body height: 120 = 12.0 mm |
| 060 | Body thickness: 060 = 6.0 mm |
| E | Environmental: E = RoHS; F = RoHS + halogen-free |
| S | Case color: S = yellow; E = gray |
| G | G = automotive product |
