| Safety class | X1, across-the-line |
|---|---|
| Automotive qualification | AEC-Q200 Rev E qualified part numbers available |
| Rated voltage | 330 / 440 / 480 / 500 / 530 VAC |
| Capacitance | 0.001–1.0 µF |
| Impulse test voltage | 4 kV (CR ≤1.0 µF) |
| Temperature cycling | 1,000 cycles, −55 °C to +110 °C |
Automotive boxed metallized polypropylene film capacitors, Class X1, for across-the-line EMI suppression. AEC-Q200 Rev E qualified part numbers available; 330–530 VAC; 1 nF–1 µF.
Showing 5 of 5 part numbers
| X1S3102KN1A5130110050EVG | 0.001 | ±10 | 480 | X1 |
|---|---|---|---|---|
| X1S1224KT1B5260200110EVG | 0.22 | ±10 | 440 | X1 |
| X1S1224KT1B5260200110EVG-02 | 0.22 | ±10 | 440 | X1 |
| X1S1684KV135310280140EVG | 0.68 | ±10 | 440 | X1 |
| X1S1684KV135310280140EVG-02 | 0.68 | ±10 | 440 | X1 |
— = not specified
Need a value that is not listed? Send us your specification.
Datasheets, technical documents and approval certificates for this series. English editions of documents marked “Chinese” are available on request.
Automotive boxed metallized polypropylene film capacitors for across-the-line (L–N) EMI suppression, Class X1 to IEC 60384-14 for higher impulse stress. AEC-Q200 Rev E qualified part numbers available; temperature cycling 1,000 cycles, −55 °C to +110 °C. Rated 330, 440, 480, 500 and 530 VAC; 1 nF–1 µF; tolerance ±10% or ±20%. Impulse test voltage 4 kV (CR ≤1.0 µF). Climatic category 40/110/56B.
| Product role | Automotive Class X1 across-the-line (L–N) interference-suppression capacitor |
|---|---|
| Construction | Boxed metallized polypropylene film |
| Safety function | Class X1 to IEC 60384-14 for the higher-impulse across-the-line category · not for line-to-earth (Y) or reinforced-insulation positions |
| Automotive qualification | AEC-Q200 Rev E qualified part numbers available; qualification report and temperature grade on request |
| Temperature cycling | 1,000 cycles, −55 °C to +110 °C |
| Climatic category | 40/110/56B (lower category temperature −40 °C; −55 °C is a temperature-cycling test condition) |
| Operating temperature | Upper category temperature +110 °C |
| Rated AC voltages | 330 · 440 · 480 · 500 · 530 VAC |
| Capacitance range | 0.001–1.0 µF; available values depend on rated voltage and pitch |
| Capacitance tolerance | ±10% (K) · ±20% (M) |
| Dissipation factor | tan δ ≤0.1% |
| Insulation resistance, CR ≤0.33 µF | ≥15,000 MΩ |
| Insulation resistance, CR >0.33 µF | Time constant R × C ≥5,000 s |
| IR measurement conditions | 20 °C · 100 VDC · 60 s |
| Voltage proof, terminal to terminal | 4.3 × UR DC, 5 s |
| Voltage proof, terminals to case | 2 × UR + 1,500 VAC, min. 2,000 VAC |
| Impulse test voltage | 4 kVDC for CR ≤1.0 µF; a test condition, not a continuous or repetitive rating |
| Impulse sequence | 24 pulses · 9 s charge / 2 s discharge cycle |
| Self-ignition test | U~ = UR · Ui = 4.0 kV · 20 discharges of the energy-storage capacitor per sample · 5 s interval |
| UL / cUL approval | UL 60384-14 · E208107 · 0.001–1.0 µF at 330/440/480/500/530 VAC |
| VDE / ENEC approval | IEC/EN 60384-14:2013 + AMD1:2016 · 40054631 · 0.001–1.0 µF at five AC ratings |
| CQC approval | CQC22001337767 (issued 2022) |
| IECEE CB certificate | DE1-65967 · test report 288316-TL3-1 |
| Automotive suffix | G in the last position of the part number = automotive product |
| Voltage codes | R1 330 · S1 440 · S3 480 · H2 500 · K1 530 VAC |
| Lead-form codes | 1 long straight · 2 inner-bent · 5 straight taped · 6 bent taped |
| Environmental codes | E RoHS · F RoHS + halogen-free |
| Case-color codes | V blue · E gray |
| Body dimensions | W 10–41.5 · H 9–34 · T 4–22.5 mm; 37.5 mm dimensions: see part drawing |
| Lead and pitch tolerance | P ±0.5 mm · lead diameter ±0.05 mm |
| Lead diameter | Ø0.6 mm at 7.5 / 10 mm pitch · Ø0.8 mm at 15 / 22.5 / 27.5 mm · Ø1.0 mm at 37.5 mm |
| Lead forms | Long straight and inner-bent lead drawings in the datasheet; lead length coded from 3.0 to 29.0 mm |
| Taped lead spacing F | 7.5 / 10 / 15 / 22.5 mm; 5 mm on request |
| PP soldering limits (body temperature) | Preheat ≤110 °C · soldering ≤120 °C for ≤15 s |
| PE soldering limits (body temperature) | Preheat ≤125 °C · soldering ≤160 °C for ≤15 s |
| Wave-soldering profile (board) | Ambient to 115 °C max. in 30–130 s · rise to 260 °C max. in <1 s · peak region <10 s · cooling ≤5 °C/s |
| Reflow soldering | Not permitted; film shrinkage can degrade performance |
| Hand soldering | Tip ≤350 °C · ≤3 s · joint ≥2 mm from the encapsulation |
| Storage | ≤35 °C · ≤70% RH · ≤12 months in the unopened original packaging; avoid high temperature and humidity |
| Corrosive atmosphere | Hydrogen chloride, hydrogen sulfide and sulfur compounds can degrade terminal solderability |
| Humidity (THB) | No THB rating for this series |
| Further data on request | Metallization design and end-of-life behavior · continuous operating-temperature range and voltage derating · tan δ measurement conditions · duration and method of the terminals-to-case voltage proof · impulse and self-ignition test circuit, waveform, energy and post-test limits · biased 85/85 humidity data · ESR/impedance, RMS and peak current, dV/dt, hot-spot temperature, thermal resistance and lifetime · PPAP, traceability, production screening and change notification |
Ranges by dielectric, package and lead style within this series.
| Variant | Body dimensions | Rated voltage / capacitance | Construction / class / tolerance | Lead / land pattern | Notes |
|---|---|---|---|---|---|
| N · 10 mm | W 13 · H 11–15 · T 5–8 mm | 330–530 VAC · 0.001–0.01 µF | Metallized polypropylene · X1 · K/M | P 10 ±0.5 · Ø0.6 ±0.05 mm | Compact case for low capacitance values. |
| Q · 15 mm | W 18 · H 11–19 · T 5–11 mm | 330–530 VAC · 0.01–0.068 µF | Metallized polypropylene · X1 · K/M | P 15 ±0.5 · Ø0.8 ±0.05 mm | Mid-range values. Availability on request. |
| T · 22.5 mm | W 26.5 · H 15–23 · T 6–13 mm | 330–530 VAC · 0.047–0.18 µF | Metallized polypropylene · X1 · K/M | P 22.5 ±0.5 · Ø0.8 ±0.05 mm | — |
| V · 27.5 mm | W 31–31.5 · H 20–28 · T 11–18 mm | 330–530 VAC · 0.1–0.33 µF | Metallized polypropylene · X1 · K/M | P 27.5 ±0.5 · Ø0.8 ±0.05 mm | — |
Confirm Class X1 and define the actual mains and impulse stress first. Then specify one G-suffix part number whose AEC-Q200 report, safety approvals, voltage, capacitance, body, current and thermal limits, suffix meaning, packing and process all match the application.
Use across line conductors where the higher X1 impulse category and the equipment standard apply. It is not a Y capacitor, line-to-earth component or reinforced-insulation barrier.
Request the AEC-Q200 Rev E qualification report for the selected part number, with qualified part numbers, temperature grade, manufacturing site, test lots and results, and the change and requalification record.
Before design-in, request the drawing, suffix definition and qualification scope of the selected part number, in particular for 37.5 mm parts and part numbers with the suffix −02.
Coordinate AC frequency, X1 impulse environment, harmonics, repetitive pulses, hot spot, ambient temperature and humidity, duty cycle, vibration and life. dV/dt, current, thermal, THB and endurance data for the selected part number on request.
Check the G suffix, marking, safety certificates, body and lead drawing, packing and PP/PE construction of the selected part number. Validate soldering, cleaning and coating, vibration, storage and traceability in the final equipment.
Safety approvals: IEC 60384-14 (UL/cUL, VDE/ENEC, CQC, IECEE CB). Automotive qualification: AEC-Q200. Approval and AEC-Q200 coverage of individual G-suffix part numbers on request.
| Agency | Standard | Certificate | Scope |
|---|---|---|---|
| UL / cUL | UL 60384-14 | E208107 | MPK X1, 0.001–1.0 µF, 330–530 VAC. |
| VDE / ENEC | EN 60384-14:2013 + A1:2016 | 40054631 | MPK X1, five AC ratings, K/M, 40/110/56/B. No Annex H (DC) approval; no Annex I humidity grade. |
| IECEE CB | IEC 60384-14:2013 + AMD1:2016 | DE1-65967 | MPK X1, test report 288316-TL3-1. |
Each certificate covers the types and ratings listed on it.
Initial electrical limits, AEC-Q200 Rev E qualification, temperature cycling (1,000 cycles, −55 °C to +110 °C), an impulse test (4 kV, 24 pulses) and a self-ignition test are specified. The qualification report and humidity, endurance, current and thermal data are available on request.
| Test | Condition | Acceptance |
|---|---|---|
| Temperature cycling | 1,000 cycles, −55 °C to +110 °C | Dwell time, sample size and post-test ΔC, tan δ, IR and voltage-proof limits on request |
| Impulse and self-ignition tests | Impulse: 4 kVDC, 24 pulses. Self-ignition: Ui = 4.0 kV, 20 discharges per sample | Test circuit, energy and pass criteria on request |
AEC-Q200 qualification is not transferred by the G suffix, the series name or a general MPK certificate. Tie every part number, including −02 versions, to the qualification report, similarity rationale, manufacturing site, construction, safety approvals and change record.
Use across line conductors where the equipment standard requires or permits the X1 impulse category. It is not a line-to-earth Y capacitor or reinforced-insulation barrier.
AEC-Q200 qualification does not replace IEC 60384-14 approval, and a general certificate does not by itself cover a G-suffix construction. This series has no THB rating. Check the scope of each for the selected part.
Rated VAC and the 4 kV impulse test do not define dV/dt, RMS or peak current, harmonic heating, repetitive surge, hot spot or life. Obtain part-specific curves and validate the final enclosure.
Check the −02 suffix, body and lead drawing, packing and PP/PE soldering limits of the selected part number. Do not reflow-solder; validate soldering, cleaning and coating, vibration of heavy parts, storage away from corrosive gases and production traceability.
Example ordering code. Not every combination is available.
X1 · S1 · 104 · K · Q · 1 · B0 · 180 · 120 · 060 · E · V · G
| Code | Meaning |
|---|---|
| X1 | Class X1 across-the-line film-capacitor series |
| S1 | Rated voltage: S1 = 440 VAC; R1 = 330, S3 = 480, H2 = 500, K1 = 530 VAC |
| 104 | Capacitance code: 104 = 100 nF |
| K | Capacitance tolerance: K = ±10%; M = ±20% |
| Q | Lead pitch: Q = 15 mm; J = 7.5, N = 10, T = 22.5, V = 27.5, L = 37.5 mm |
| 1 | Lead form: 1 = long straight; 2 = inner-bent, 5 = straight taped, 6 = bent taped |
| B0 | Lead length: B0 = 20.0 mm (numeric, A and B codes) |
| 180 | Body width: 180 = 18.0 mm |
| 120 | Body height: 120 = 12.0 mm |
| 060 | Body thickness: 060 = 6.0 mm |
| E | Environmental: E = RoHS; F = RoHS + halogen-free |
| V | Case color: V = blue; E = gray |
| G | G = automotive product. Suffix −02: definition on request. |
